PERFORMANCE ADVANTAGES NO PRIMER (Primer not normally needed but please check with the manufacturer) ONE COAT SYSTEM REDUCED LABOUR COSTS Flexible elastomeric system One pack, no mixing No wastage 10 year life expectancy Water repellent Sheen finish Smooth finish DRYING TIME Up to 8 hours or overnight depending on temperature and conditions. Full cure up to 7 days. PREPARATION AND APPLICATION USES Ready for use on Flat Roofs, Weathered Asphalt and Bituminous Surfaces, Concrete, Brickwork, Fibreglass and GRP, Weathered Plys, OSB/Plywood and Wooden Substrates. > Can be brush or roller applied MOST ROOFING SUBSTRATES TO BE TREATED WILL NOT NORMALLY REQUIRE PRIMING. To the dry and cleaned surface, apply a generous coat of Britannia Durashield Waterproof Roof Coating by brush or squeegee, at the minimum specified spreading rate as stated above under the heading. Application Temperature should be between 5°C-25°C. Water Repellency Rainfall immediately after application has no adverse effect. Shelf Life Up to 2 years if stored correctly in an unopened container. IMPORTANT Britannia Durashield is not recommended for the treatment of wooden surfaces, tanking, fishponds or internal use. SCRIM RECOMMENDATION > Apply Reinforcing Scrim to all areas which can be ponded. > Reinforcing Scrim must be used on all upstands, curves, skylight bases and rainwater outlets. > Reinforcing Scrim to be used on all gutter expansion joints.
Trustpilot
3 days ago
1 week ago