Rough Country 3" Suspension Lift Kit for 1984-2001 Jeep Cherokee XJ - 630N2

Lift was a tad higher than I expected. I think it's because my old suspension was so worn out. That's a good thing. I think it's good advice to start out with this basic lift and then find out what else you need. Every Cherokee is different. I still needed to drop the transfer case. And 31" tires still rubbed in the rear of the front tires. I read up on the different problems that people have after they install this kit so I expected something. I'd do it again.Three years later.... excellent lift, almost no sag, no noises, looks great, and performs great!

Very easy to install (as long as you don't have ANY problems with rust!!!)!! Install was a breeze!! Removing the old suspension was a thrash!! We used a lift at my cousin's shop. The front took us about an hour. The rear took about 8 hours!! Every bolt, bushing and nut was rusted and broken!! We had to cut the rear springs on the front end to get the old ones out. The bolts broke where the shocks meet the body. We put 30X9.50X15 tires on. With the lift and the tires, we gained 4" in the front and 6" in the rear!!

I had to disconnect a lot more that the instructions say to install the front springs. Instructions are for multiple different kits so you'll have to wing it. This lift says it's a 3in lift and leveling kit with 3in springs front and 2in rears, but the rears are also 3in which doesn't level the Jeep.Minor complaints, I guess, but if you read the instructions and think it's going to be a quick job then just plan on a lot more work.Overall, seems to be fine so far. Worth it.

It was a bit more work than the YouTube videos would suggest. Take your time, it took me a whole weekend to complete the install, mostly due to stuck bolts

i only have the rear leafs on so far but its probably lifted it 4 inches from what it was on my 88 xj. Its taken about 6 hours so far considering i had to stop a little while it rained. going to get shock boots covers in the morning since it doesnt come with any but then hoping the front will only take a few hours since im gonna rent a coil spring compressor.

This was a good choice for lifting my newly acquired ‘98 XJ. The ride is just right (not too stiff or too soft). The rear was closer to 3.5” and the front was about 2.8”. I had to add leveling spacers, thus only 4 stars. I’ll also note that I didn’t experience any drivetrain vibrations or require a slip yoke eliminator for my application.

worked great for my 93 xj !