How to Program your Key Fob Replacement: Press each button on the remote 26 times (lock x 26, unlock x 26, horn x26) then attempt the steps outlined below1. Close all doors on the vehicle. 2. Then insert key into the ignition. 3. Press and hold the power UNLOCK button on driver’s side door panel. Do not release until instructed to do so in step 5. 4. Quickly turn the ignition ON, OFF, ON, OFF. (ON is the position just before of starting your vehicle, OFF is the position whereyou can pull your key out of the ignition) 5. Release the power unlock button on the driver’s side door panel. The vehicle should respond by locking and unlocking automatically. 6. Hold the LOCK and UNLOCK buttons on the remote at the same time until door locks cycle again. This could take up to 30 seconds. 7. NOW repeat step 6. for all additional remotes including working ones. 8. TURN ignition to ON to exit programming mode. 9. Turn ignition OFF, remove key and test all remotes to make sure that they are all properly programmed.These vehicles require the use of a professional scan tool for programming ( REQUIRES DEALER PROGRAMMING):
Trustpilot
2 weeks ago
1 month ago