Lypumso Chameleon Vinyl Wrap Grey to Purple, Glossy Car Wrap Vinyl with Air Release Self Adhesive Vehicle Body Decal Stickers Film Color Change DIY Car Wrap for Automotive Exterior Interior 1ft x 5ft

This was my first experience with vinyl wrap, and I found this product easy enough to work with. It is a tedious process (I literally spent most of a day working on it), especially to wrap the part I chose, but this was enough wrap for the job I had, including the first piece I had to throw away after tearing.I recommend watching some videos on vinyl application techniques - I needed to use a series of inlays on this shape since one sheet was not going to form fit without losing adhesion.I also recommend you buy some knifeless tape, Rapid Tac fluid, and a kit with felt tipped squeegee, knife, and plastic shape tool. it made this inlay process much easier and cleaner. You need a heat gun or torch as well, but a little heat goes a long way with this stuff! We'll see how it holds up...UPDATE:After a week of install I noticed some air bubbles forming and parts of the film lifting. I used a heat gun and reapplied the peeling inlays and then used a clear Vinyl Sealing Pen over all the edges to make the install more permanent. Once dry my vinyl application is holding up flawlessly. Make sure you heat seal the entire piece once you are done wrapping to ensure tight adhesion (and do finish the edges that are not touching paint with something such as the Seal-It Pen).

Air release channels allowed for no bubbles, very happy with it

Doesn’t stick great.

El color muy bonito y el material muy bueno fácil de usar si tienes una gun heater.

As expected