Car Paintless Dent Repair Kit,Auto Body Dent Puller Car Dent Removal Tools with Golden Lifter,Glue Gun,Bridge Puller, T-bar Puller,Rubber Hammer,Suction Cup,Storage Bag (Combination 2)

Description

Usage Instructions Step 1.Clean dent surface. Step 2.Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes. Step 3.According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks. Step 4.Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. Step 5.After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear. Step 6.After finishing the dent,use the alcohol or hot water to clean the glue which on the car and the puller tabs. Step 7.If there are still raised points on the repaired surface, you can try to align the raised point with a leveling pen and gently knock it with a rubber hammer until the repair is smooth. If the repair fails, please repeat the operation until it is repaired.