Prime-Line D 1735 Roller Assembly, 1-1/4 In. Tandem Wheels, Concave Edge, Ball Bearing (Single Pack)

I waited a couple months to write this to see how the door performed over time. It's really nice! It came in plenty of grease and the wheels rolled very freely. Super easy to install, and the door's performance has not changed in months so it's working really well. My wife is happy (which was the goal)!

Works great! My door slides like new!

All metal construction! The rollers I had to replace had broken PLASTIC rollers...I thought, "really!?"I will state that I am a home owner learning as I go and not a pro or even a guy with a lot of experience. I don't consider myself to be all that "handy" but I do try.At any rate, these seem well built and roll better & smoother than the old ones ever did. I gave them 4 stars because they only come with the 2 screws for vertical adjustment. No mounting screws are included (not mine, at least) with these so if my originals were stripped or too worn to re-use so in my opinion that lost a star.

glass doors are heavy, took two strong people to remove it, but once the door was out of the frame, installation was easy, and the door is smoothly gliding again (old roller ball bearing were shot...)

Had a glass sliding door that was really tough to open and close. Finally broke down and got two of these guys. First I will say at no fault of the product, the door was a huge pain to get off. The old assembly was seized in the door and the screws to lower the wheels were stripped and seized to the point that I had to pry the door out. Thankfully I didnt damage the door or trim around it.On to the install of the new product. Super easy. Weren't the exact replacement for the old one as the old had two hooks, on the top that slide into place up inside the door, however the holes lined up for the screws to install correctly so I thought i would proceed anyway. Boy am i glad i did. This door glides like a hot knife through butter. I can use a finger to move the door closed. Wish I would have done this years ago.The metal housing and wheels seem sturdy, but for what I paid for them, I wouldn't mind replacing them in 3 or 4 years (we use this door a lot and have dogs going in and out, plus hair and gunk build up etc). Overall, if you are on the fence at all, put it in your cart, and press the checkout button.

20 year od door wall, hard to find cross reference for part, this one does worked. !.24 wheel diameter, none had tabs found on original and I found it worked without them. I would have prefered the 1.5 inch wheels but didn't want to mess with clearance issues. Very heavy door, I did it myself but would recommend having someone on call when your ready to actually remove the panel, replacing the wheel sets is a 5 minute job once the panels out. Hardest part was getting the sliding door panel out, very tight fit, sanded down the inside vinyl rail attached to the frame about an 1/8 of an inch and sanded (2) 1/4" releif cuts 3 'long to give clearance for the wheels which would not fully recede into the glass panel. you also need that relief cut to be able to slide a screw driver in to push the wheels up to clear the frame when removing.Check that the wheel assemblies seat proberly and raise up and down before installing, I had some binding issues and had to remove everything a secound time, found the secound time around it was beeter to just loosly snung up the mounting screw before installing and snug them up after getting evething on track

The product does not come with the 1/4" screw needed to attach the door. What should have been a 10 minute job turned into an hour. I had a 1/4" bolt I cut and filed to the correct length.It worked, but pissed me off the manufacture did not have the insight to include a $0.20 machine screw.Idiots..

I need to add rubber bumpers to the slider.

Very solid build and great quality.Definitely worth buying, highly recommended!

My patio door wasn't rolling well. Actually, not at all.These rollers fit properly and now it's all good.Got to be careful picking your roller. There are a number that look similar but don't quite match up.Check the line drawing dimensions carefully.

Sliding doors on walk-in cooler

Juste un bémol. Le trou que vous voyez en haut pour vissé. Il est bcp plus large donc ça visse pas. Mais avec le poid de la porte j'ai réussi a l'installer pareil et la vis est dans le trou quand même et tiens la porte en place . Mais si j'enlève la porte , les roulettes vont être lousse mettons. Rien de grave sinon c'est un bon produit juste la photo qui est mensongère.

The existing rollers never really worked for the last ten years that we owned the house. I checked the local hardware store and found the price much higher than here.I had to cut the track to get the newly installed hardware to fit, but when I did, the door functions properly.